top of page
SMARTDIVER SLIDING RUNWAY
"THE SLIDING RUNWAY BRINGS THE WASHBAY ASSEMBLY WITHIN EASY REACH FOR MAINTENANCE, WITHOUT REQUIRING OPERATORS TO LEAN OVER TANK EDGES."
Locate the Metal Uni-strut Bar, also known as a Chock.
The Chock has a Bolt that drops into a hole on the Washbay Base Plate.
The Chock is attached to the runway by a lanyard.
Grip the Chock firmly and pull it toward you, it will glide smoothly along the Slider Rails.
With the Washbay pulled forward, you now have safe, easy access to remove the Sensor and perform maintenance without leaning over the Tank.
When finished, push the Washbay back to its operating position using the Chock.
Ensure the Washbay is fully returned and place the Chock back in the Runway Track.
The Chock stops the Washbay from sliding during operation.
bottom of page