|
|
> AL-CAR-K Slurry Liquor phase
density refractometer
> AL-6340 Slurry steel/ceramic in-line
conductivity probe
> SmartDose Longwall emulsion station
> SmartDiver |
Slurry Density Meter
DENSITY ANALYZERS FOR SLURRIES |
MudDiver, Level
measurement and
tank profile station
> Slurry Density Meter
In-line sound velocity
and sound attenuation
for clean liquors and
slurries for specific
concentration
measurments
> Clarity Probes
Clarity and suspended solids
sensors for direct in-tank or
in-line installation
| 9690 Series Hybrid Sensor Technology Slurry Density Analyzer
The Rhosonics sensor of the Model 9690 Ultrasonic Density Analyzer employs only one, simple to install, flush mounted probe, which can be installed in a tank or in an existing pipeline, or supplied with our UFTC Full Bore Flow-Through cells, see picture.
Benefits
• Very easy to install
• Density measurement, independent of medium type
• Fully inline, zero intrusion
• Very insensitive to gas bubbles
• Safe and durable probe system
At last a new and extremely reliable technology is available for the heavy industry to measure slurry and suspension density, inline, and with a minimum of installation and maintenance effort. This means that inline slurry monitoring is now feasible, without drawbacks of other inline density measurement methods, like nuclear and microwave systems.
The abrasive and corrosion resistant sensor material, standard made of PEEK, well protects the internal elements, which take care of transmitting and receiving of a broad spectrum of ultrasonic sound waves. Through the interaction of the sound between the contact surface and the fluid to be measured, the Model 9690 derives a complete image of the slurry density, without the need for the sound to pass through the fluid. From the imaged spectra, the system derives the density of your slurry, regardless of composition, particle size and other properties of the particles.
Features
• High accuracy and reproducibility
• Suitable for all types of slurries
• Maintenance free
• Probe type available to suit your application
Industries
The extremely powerful and revolutionary technology allows inline fluid density measurement of any known slurry. Field tests and experiments with a large variety of different compositions prove the Model 9690 analyzer's versatility.
• Limestone, Gypsum
• Silicon carbide, Zirconium Carbonate
• Sand, Cement, Concrete, Dredging sludge
• Ground Ore, Drilling Mud
• Cutting and Polishing Slurry
Other Solutions
Model 9690 measures the density of the slurry. When liquor density is desired or in case you wish to measure the suspended solids (TSS), or all three parameters independently, then Rhosonics Model 9670 with Full Bore Flow Through sensors is the instrument of your choice.
Installation
Three methods probe installations are available to suit your specific application.
• UMP-39 diver/immersion probes are available with different extension length, for easy installation inside a tank which is accessible from the top.
• UFTW Wafer sensor (1 to 3” pipes)
• UMCS type probe with weld adapter can be installed permanently in any tank or pipe size of 4” and larger.
Specifications
|
|
|
|
|
