|
|
> AL-CAR-K Slurry Liquor phase
density refractometer
> AL-6340 Slurry steel/ceramic in-line
conductivity probe
> SmartDose Longwall emulsion station
|
AL-CAR-K
SLURRY LIQUOR-PHASE DENSITY REFRACTOMETER |
> SmartDiver MudDiver, Level
measurement and
tank profile station
> Slurry Density Meter
In-line sound velocity
and sound attenuation
for clean liquors and
slurries for specific
concentration
measurments
> Clarity Probes
Clarity and suspended solids
sensors for direct in-tank or
in-line installation
Click on the image above to download the AL-CAR-K brochure.
|
• More than 100 installations in Australia and around the world;
• 24 month warranty;
• Measures density of the liquor phase of a slurry - independent of
suspended solids or mud;
• Extensive after sales service;
• Real-time and accurate;
• In-line measurements;
• Reliance on lab sampling for Caustic and A/C control is greatly
reduced
• Operators can respond immediately to process disturbances
and have near immediate feedback of changes initiated
• Closed loop feed back control for Caustic dilution loops is
absolutely achievable
THE SENSOR
• Uses a digital CCD array to detect light bend angle (critical angle)
in the liquid phase of a solution;
• This angle is directly proportional to the density of the liquid phase;
• Use no moving parts, pots or dials and as the measurement is
digital and all parts are fixed, it is completely free from signal drift;
• Method of critical angle detection is also immune to the effects of
bubbles, suspended solids (up to 90% suspended solids), colour,
vibration, flow, temperature and viscosity;
• Is installed directly in the process piping or sidestream. We angle
mount the sensor to reduce the effects of erosion;
• We implement and maintain a flow velocity above 1.5 meters per
second and we do not experience scaling on any installation.
• Prism washing systems available for solids free or low velocity
applications
 
|
|
HOME | CONTACT US | SITE MAP
|
|
|
